LT - 48 UNIVERSAL PROGRAMMER
For more than 5000 kinds of IC programming, included phones memory


Description

Feature

The LT- 48 is a universal device programmer which works through your PC's parallel port. It features a 48-pin universal pin driver. It supports over 3000 different devices including PAL, GAL, CEPAL, CPLD, EPLD, PEEL, MAX, MACH, pLSI, microprocessors, EPROM, Serial PROM, PROM and Flash memory.
Supports all GSM/CDMA/GPRS phone's memory to read & write ,direct to repair problem phones.
Support memory/cpu/pal and about more than 3000 device.
48-pin ZIF with device insert/contact check
Auto-sense/Self programming with statistical report (for mass production)
No adapter required for DIL chip up to 48-pin guarantee
Support 3.3 V low voltage chips
Program 16-Mbit Flash within 120 seconds
Support Windows 3.x, Windows 95/98/me/2000 and DOS, free lifetime software upgrade
Universal 48-pin BGA, 44-pin PLCC, 40-pin TSOP, 44-pin PSOP and 48-pin TSOP 56-pin TSOP adapters

Universal pin driver--True universal programming
The MOSFET logic controls the programmer's pin switches, so each pin can supply Vcc, Vpp or ground. Pins can also be configured for TTL high/low levels with pull-high/pull-low, high-speed clock and tri-state. This advanced pin design lets you program any DIP device up to 48 pins without an adapter. It also ensures support for the full range of silicon technologies on the market--today and tomorrow.

Unbeatable programming speed
The LT-48's on-board intelligence reduces system overhead to a minimum. The LT48 can program an 8-Mbit EPROM in less than 100 seconds. (The actual throughput depends slightly on the processing power of your PC; the above time was with a 486DX2-66 processor.) The LabTool-48 is much faster than its competitors, making it much more productive with today's high-density, multi-megabit memory devices.

Device insertion and contact checks--No mistakes!
The LT48 performs device insertion and contact checks before it programs each device. It can detect poor pin contact and devices inserted upside down or in the wrong position. This function protects your pocketbook by preventing expensive chip damage due to operator error.

EPROM and Flash memory ID detection
Many EPROMs and Flash memories have a burnt-in device ID and manufacturer ID. The LT48 can read the device's ID to determine its vendor and product number. This feature is especially useful with second-user chips and devices that have had their part number accidentally (or intentionally!) removed.

Auto-sensing and self-programming
To meet mass-production requirements the LT-48 has implemented new patented technology in both its hardware and software. After entering the Mass-production Mode, the production line operator inserts a device into the ZIF socket. An LED on the LT-48 will indicate the device is programmed successfully and the operator simply removes it and replaces it with a new one. No formal training is necessary adding flexibility and saving time and money. In addition, the LabTool-48's auto-sensing feature ensures the device has been inserted correctly and then automatically programs the device. Furthermore, in the mass-production mode the system keyboard is automatically disabled preventing the operator from making any inadvertent mistakes.

Memory buffer auto Increment
If your memory devices need individual serial numbers, the LT-48 has an Auto Increment function, This simply increments the serial numbers in the buffer each time a new device is inserted. This saves time and money. The LT-48 has everything you need in one package: 48-pin driver, socket and complete device support library. You don't need to order separate device libraries.

User-selectable verify voltage, one- or two-pass verification
The LT48 lets you select the verify voltage after you have programmed the device, e.g., 5 V, 5 V ?%, 5 V ?0%. This feature ensures that your device has been programmed properly, preventing failures due to programming errors and ensuring data retention.

Easy operation--Get to work immediately
The programming software's easy-to-use graphical interface eliminates your learning curve--you don't need the manual! Like MS-Windows, the software offers pop-up dialog
boxes and on-line help. You can simply type the device vendor's name and part number. The software will select the proper driver automatically; you don't need to search one by
one through long lists of devices.

Project file save option
You can save a configuration project file which contains the device select, the buffer data and all the programming setup options, This file can be called upon at any time for future use without having to go through the setting up procedure again.

Non-DIP device support through versatile converters
The LT48's universal pin driver capability lets it program all 48-pin DIP devices without DIP-to-DIP adapters, including all single-chip microcontrollers. The market, however, offers many choices besides DIP devices, such as PLCCs, SOPs, TSOPs, QFPs and SDIPs. We have developed over 40 different converters to support these special-package devices. The LT-48's universal pin driver significantly reduces the number of converters required, reducing your cost for future expansion. For example, a single 44-pin PLCC adapter lets it program all 44-pin PLCC devices.

File format conversion
JEDEC, POF, Binary, Intel HEX, Intel EXT HEX, Motorola S and HP 64000ABS

System requirements

Operating system:
DOS Version: DOS 3.1 or higher (or Windows DOS prompt)
Windows Version: Windows 3.x, Windows 95/98/ME/2000
Processor: 386, 486, Pentium or Pentium Pro
4 MB RAM minimum, 8 MB recommended
Hard disk with 8 MB free space
Parallel port interface

General

Power: 100 to 240 VAC, auto-switching
Freq. range: 47 to 63 Hz
Power consumption: 25 W
Operating temperature: 5 to 45¡ãC (41 to 113¡ãF)
CE Certified


Device Support Summary

ALi: Microcontroler
Altera: MAX Series, Classic PLD, Serial PROM.
AMD: MACH Series, PAL, up, Bipolar PROM, EPROM, Flash.
ATMEL: ATV Series, ATF/AT PLD, AT89xx/90xx, Serial PROM, EPROM, Flash.
Cypress: CY7C3xx, PLD, Bipolar PROM.
Fujitsu: EPROM, Flash.
ICT: CPLD, PEEL, Serial PROM.
Intel: IFX, PLD, 87xx, EPROM, Flash.
Lattice: pLSI/ispLSI, GAL.
Macronix: EPROM, Flash.
Microchip: PIC, Serial PROM.
Motorola: 68 Series uP.
NS: GAL, COP, Serial PROM, Bipolar PROM, EPROM.
Philips: CPLD, PLUS/PLS, 87xx.
STMicroelectronic: GAL, ST62xx, EPROM, Flash.
SHARP: Flash.
SST: Flash.
TI: TIBAL, TMS320, TBP, EPROM, Flash.
Winbond: W78Exx, EPROM, Flash.
WSI: PSD3xx/4xx, Bipolar PROM, EPROM.
Xilinx: XC7000/9000 Series, Serial PROM.
Zilog: Z86xx.

Device Support in Detail
You can also find the support device lists by clicking following items:

All,
Complex PLD,PLD, PAL, GAL, CEPAL,
Single Chip Microprocessor,
Bipolar & CMOS PROM,
E/EEPROM & Flash,
Download the most update LabTool-48 software for a trial.

Packages included

CD-rom with the software, user manual